Got Big Water

YouTube
YouTube Channel

Facebook
Facebook Page

Twitter
Twitter Page

Rural Water Supply Operations Seminar
Rural Water Supply Operations Seminar

Water Supply Officer Seminar
Water Supply Officer Seminar

Relay Pumping With Large Diameter Hose
Relay Pumping With Large Diameter Hose

Dry Fire Hydrant Designs and Installations
Dry Fire Hydrant Designs and Installations

Suction Strainer Flow Test Project:Test Results

Web Counters
Website Visitors
Since
June 22, 2009
1,802,088
Visitors Today
Feb 27, 2021
133



Official PayPal Seal
Dry Fire Hydrant Design #36 - Bridge Mount Installation - Bel Air, Maryland
Email Print RSS Facebook Twitter RSS

By President Mark Davis
December 17, 2020

Another one of our bridge mount dry fire hydrant installations that we completed this Fall in Harford County, MD....this time on Thomas Run Road in Bel Air. The lift was really high at this location and required 20-feet of pipe...which is the physical limit of our design. The installation used our saddle-mount bracket design and an ETT suction head and stream strainer. When flow tested using Darlington's 1500 gpm single-stage pumper, we were able to achieve a peak flow rate of 1067 gpm...pretty impressive given the lift. Elevation at the location was 140-feet. The project was funded in part through a grant.

 

Add a Comment Add a Comment 0 Comment(s)


Website Designed and Hosted By: Content Proudly Maintained By: Contact Info:
Firehouse Solutions
www.FirehouseSolutions.com
GBW Associates, LLC
3178 Cardinal Drive
Westminster, MD 21157

Emergency Dial 911
Phone: 443-398-6619
E-mail: thebigcamel@gotbigwater.com
Copyright © 2021 Firehouse Solutions (A Service of Technology Reflections, Inc.)